data sheet part number 856526 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 ? triquint semiconductor page 1 of 5 features for wimax applications usable bandwidth 10 mhz high attenuation no impedance matching required for operation at 50 w single-ended operation ceramic surface mount package (smp) hermetic rohs compliant (2002/95/ec), pb-free package pin configuration surface mount 3.00 x 3.00 x 1.22 mm bottom view smp-12 6 5 4 3 2 1 single - ended configuration pin no. description 2 input 5 output 1,3, 4 ,6 case ground 0.69 1.22 nom. 1.32 max. 0.75 0.60 1.50 0.75 3.00 3.00 dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0m, over a 2 C 6m ni plating pb
data sheet part number 856526 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 ? triquint semiconductor page 2 of 5 electrical specifications (1) operating temperature range: (2) -40 to +85 c parameter (3) minimum typical (4) maximum unit center frequency - 810 - mhz maximum insertion loss 805 - 815 mhz - 3.5 5.0 db amplitude ripple (5) 805 - 815 mhz - 0.7 2.0 db group delay variation 805 - 815 mhz - 40 150 ns absolute attenuation 10 - 760 mhz 760 - 790 mhz 790 - 792 mhz 792 - 794.5 mhz 825.5 - 828 mhz 828 - 830 mhz 830 - 860 mhz 860 - 1300 mhz 50 30 20 10 10 20 30 50 58 47 42 30 30 40 47 56 - - - - - - - - db db db db db db db db source impedance (single-ended) (6) load impedance (single-ended) (6) - - 50 50 - - notes : 1. all specifications are based on the triquint tes t circuit shown below 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. amplitude ripple is defined as the worst case di fference between the peak and adjacent valley withi n the defined frequency points 6. this is the optimum impedance in order to achiev e the performance shown test circuit: actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input no impedance matching required 1,3,4,6 2 5 50 50 w ww w w ww w 50 w single-ended output no impedance matching required
data sheet part number 856526 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 ? triquint semiconductor page 3 of 5 typical performance (at room temperature)
data sheet part number 856526 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 ? triquint semiconductor page 4 of 5 matching schematics actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input no impedance matching required 1,3,4,6 2 5 50 50 w ww w w ww w 50 w single-ended output no impedance matching required marking pcb footprint cb code marking date code jjjym logo id dot sawtek .96 3.20 sq 1.27 .38 .81 1.70 the date code consists of: day of the current year (julian, 3 digits), last digit of the year (1 digit) and hou r (2 digits) this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel 3.25 section a-a 1.75 ?1.5 4.0 a 12.0 5.5 ?1.5 4.0 2.0 3.25 1.4 0.21 a ?102 ?20.2 ?13.0 2.0 direction of travel ?330 12.8 2.7 logo sawtek id dot dimensions shown are nominal in millimeters packaging quantity: 5000 units/reel
data sheet part number 856526 810 mhz saw filter subject to change or obsolescence without notice rev a 06/08 ? triquint semiconductor page 5 of 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t -40 +85 o c storage temperature range t stg -40 +85 o c important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jesd22-b102, pb-free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint componen t described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb
|
